|
Especially made Stainless Steel Insert to prevent over tightening of Brake Fluid Reservoir to Master Cylinder body.
These hold the Reservoir at the ...
|
|
|
Price: £4.55
|
|
|
|
|
Insert to prevent over tightening of Brake Fluid Reservoir to Master Cylinder body.
These hold the Reservoir at the correct height above the cylinde...
|
|
|
Price: £0.99
|
|
|
|
|
Brake Master Cylinder Reservoir only
DOES NOT INCLUDE CAP
Caps can usually be cleaned up nicely.
Carries original AP Lockheed Markings ...
|
|
|
Price: £16.50
|
|
|
|
|
Four Original Equipment Quality Brake Pads by Borg Beck.
Replaces GBP242AF or the former GBP242 which contains asbestos - the letters AF equate to ...
|
|
|
Price: £15.71
|
|
|
|
|
Push fit `one shot` Brake Pipe Clip in black to hold 3/16 pipe. The locations are
The front cross member.
The rear trailing arm casting
The BL P...
|
|
|
Price: £0.33
|
|
|
|
|
Zinc Plated `BZP` 3/8 UNF Male Tube or Brake Pipe tube nut used at Master Cylinder, PDWA Switch and other joints requiring a male connector. ...
|
|
|
From: £0.28
|
|
|
|
|
Air Clip in plastic to support Brake Pipes.
The illustration in the BL Triumph Stag Catalogue on page 4.62 is incorrect.
This is clip 625521 as sh...
|
|
|
Price: £0.92
|
|
|
|
|
PLEASE NOTE POSTAGE IS HIGH BECAUSE ONLY ROYAL MAIL MAIL WILL CARRY THIS ITEM 1/2 litre bottle of TRW brand Brake fluid DOT 5.1.
DOT 5.1 has a wet boiling point of 375 degrees.
Better yet, DOT 5.1 is half as viscous as DOT 4...
|
|
|
Price: £6.75
|
|
|
|
|
Brass 5/16 UNF nut to attach exhaust pipe to manifold stud. Three per side....
|
|
|
Price: £0.53
|
|
|
|
|
LH BReather Hose - Remanufactured part. Nice tight fit. High Quality Rubber part....
|
|
|
Price: £7.52
|
|
|
|
|
T piece for Carburettor Breather Pipes.
White colour as original. Slightly different shaped centre.
Very tight fit with 13mm barb. Lubricate with dr...
|
|
|
Price: £6.15
|
|
|
|
|
Short breather between Valve cover outlet and Tee piece.
...
|
|
|
Price: £2.48
|
|
|
|